Dura Seal 400
- Made of 40% epoxy plus solvents that
evaporate causing some odor during application
- Curing time of 5 to 7 hours
- Hard, typically 7 mils thick
- Some shrinkage during curing process
- Easy to work with; faster flowing than
- Comes in a variety of colors
- Appropriate for surfaces that are
relatively flat and will not sustain extreme mechanical abuse where
maximum skid resistance is not required
- Cost of materials is about 1/3 that of
- Lower shipping weight (per square foot
of coverage) than Dura Poxy
Click here for a color chart
Porous concrete floors or floors where a high surface
buildup is desired need the heavy-bodied epoxy coating of Dura Seal 400. Dura Seal 400 penetrates into the pores of the concrete for excellent adhesion and
"lies on top" to form a solid surface plate, recognized by the USDA as
a contaminant barrier.
In addition to black, white, and
clear, Dura Seal 400 comes in
a wide variety of floor colors.
Also choose from a wide selection of
of plastic chips which may be sprinkled within the coating to provide an
endless variety of colors and textures.
Dura Seal 400 meets all USDA and EPA
standards. Applied by roller, brush, or spray, it leaves an easy-to-clean, hard,
glossy floor surface, suitable for incidental food contact. Available in 10
gallon or 2 gallon units and mixes 50/50.
Free Cost Analysis
For Your ProjectóClick Here!
The Dura Seal 400 promise
||Dura Seal 400 epoxy gives your floor whether it be in an automotive show room or
service area or a plastics or printing shop the clean, neat, organized look that impresses customers.
||Dura Seal 400 provides floors with heavy-duty protection from wear. It prevents dusting of
concrete, makes floors wear longer, protects floors from penetration of oil,
grease, and foreign matter, mechanically hardens the concrete by filling the
pores and binding the particles, and provides a hard, yet elastic, durable,
There is no higher quality floor seal available on the market today. Northwest
Airlines is still using a Durall floor laid down 33 years ago!
||Applying Dura Seal 400 is
simple and concrete preparation is the key to long life and over-all lower costs.
Scrub with carbide nilo grit type
brush and rotary scrubber. Then vacuum off and do as follows:
- Apply Degrease Rite, a pH 12
- Apply Dura Kleen Etcher, a pH 5
- Water rinse twice.
- Allow to dry to white finish.
- When surface is rough and clean to
touch (no dust), apply with roller, brush, or airless sprayer (use vapor mask).
- After 6 hours, repeat step 5. as needed.
- Drivable in 12 hours, cures over 28
Timing per 1,000 sq. ft. of above:
- 1.5 hours
- 1.5 hours
- 1.0 hour
- 5.0 hours
- 0.5 hours
- 0.5 hours
- 12 hours
||Durall support is
unparalleled. We have been here for over 30 years and will be here when you need
us in the future.
Our in-house laboratory has developed over 500 support products, enabling us to
be a true one-stop shop.
And of course, you have our industry-leading 7-day,
24-hour hotline support staff on duty to assist with all your in-the-field
||You will be delighted
with the cost of a Dura Seal
400 floor. Because we manufacture it ourselves, our price is automatically at least 20% less than that of suppliers who do not.
For example, our 2-gallon container covers
600-900 sq. ft. (depending upon the existing floor surface) and is just $137.99. Our 10-gallon
container is $689.99 and covers
3,000 to 4,500 sq. ft.
Which Industries benefit from Dura Seal 400 floors?
Companies involved in
storing or processing food
Companies who are under
Breweries and Granaries
Frozen food processors
We invite you to join
Pillsbury, General Mills, Swanson Meats, Marigold Foods, and our many other food
- New car dealerships
- Repair shops
- Oil change stations
- Consider joining the many Cadillac
dealerships, Amoco gas stations, and Valvoline centers who benefit from Dura Seal
- Printing companies
- Plastics factories
- Metal plating factories
- Special parts manufacturers
- Join our many customers like those in
the computer and printing industries who need to present a positive image of
- Garage floors
- Wood plank or plywood floors
Please click here for a 9-page
color brochure providing detailed
information on our floor coatings and their applications.
The brochure is in Adobe PDF format and requires the
Acrobat Reader software in order to be viewed.
The file is about 4 MB in size and may require several minutes to fully download
on a slow Internet connection.
Industrial Flooring Slide
In order to view this slide show, you must have
Microsoft Power Point installed on your computer. Please note that the file size
is about 4 MB and will download very slowly on a low-speed connection such as a
dial-up modem. Rather than view the show immediately, you may wish to download
the file to your own computer and then view it off-line. If you are using
Internet Explorer on a PC, the slide show can be downloaded (for later viewing) by
"right-clicking" on the link above and selecting "Save Target As."
Note that if you are using an Apple/Macintosh computer, clicking on this link will
automatically download the (4 MB) file to your hard drive.