Test your shop, kitchen, or production floor for color,
application, and wear
will send you a sample kit and profile of what you need.
Click here to request a $50 sample kit
plus free project cost analysis.
Looking for the best floor paint, concrete
resurfacer, concrete floor seal, garage floor epoxy, or concrete paint before
doing a major project? It's often better to test both the product and colors of
your flooring product to make sure they are compatible with your goals. Durall's
low cost test kit provides our customers with the confidence that our products
will meet the tests of both durability and ease of application.
The test kit may be purchased in any color available. It includes enough epoxy
to do two coats on a little over 40-sq. ft. of bare concrete, along with the
recommended cleaners, applicators, and step-by-step instructions. While
materials for repairing cracks and holes are not included in the kit, Durall
does have those available. Although these newly applied epoxy floors don't fully
cure for about four weeks, they are at 90% hardness in seven days. Besides
durability, these kits allow examining how well the color choice fits in to the
surroundings. Also, the skid resistance of shiny floors and compatibility with
lighting and other factors can be experienced firsthand.
This kit of is available in the Dura seal 400 epoxy product line. Note that this
line does contain solvents, which emit a strong odor for 7 to 10 hours
until cured. If an application is needed where odor cannot be present and/or if
the uneven surface needs to be brought back up to level, we would recommend
trying out the Dura Poxy hundred-percent-solids epoxy line. This kit price is
also $50, but produces about half the coverage which would mean two coats on
about 20 sq-ft. of surface. However, because there are no solvents, pits and
irregularities in the floor can be filled with this liquid finish. Of course,
the more volume needed to fill imperfections, the less square footage will be
covered. In addition, this coating requires about 12 hours for each applied coat
to cure. It is of course important for both epoxy products to be stirred at
least 200 strokes to assure that the product will harden properly when on the
We send you a complete list of materials and
tools, including prices, needed for your flooring project. Detailed,
step-by-step instructions covering every aspect of coating your floor, including
preparing the surface, applying the coating(s), and keeping it smooth and clean,
are also included. The kit allows experimenting with different sample chip
colors and other variations.
Buy only what you need. Note that the price for our two-quart sample kit of Dura
Seal 400 includes a quart each of our two recommended cleaners and an
application brush. As an added bonus we will send your choice of up to three
samples of color chips to experiment with. We will also send a sample project
quote. Your quote will include floor coating materials, and also repair, coving,
tools, preparation, virtually everything you may need to complete a professional
job, exceeding health code requirements.
You are under no obligation to purchase and we are happy to answer any questions
you might have about your project - whether you buy our product or not.
Click here to request a $50 sample kit plus free project cost analysis.
Note also that Durall Concrete Floor Coatings is an expert installer as well as
manufacturer. Please let us know if you are interested in installation services.
Call 800-466-8910 Now!
A Durall technician is available for immediate assistance regarding questions
about your free cost analysis 24/7.
Or, contact Chris Biesanz at
by phone 1-800-466-8910 or 952-888-1488
Return to How-to main page.
(C) Durall Manufacturing. All rights reserved.