Epoxy paint for coating concrete floors

 
Return to Press Room
 
FOR IMMEDIATE RELEASE

Contact:
Harvey M. Chichester
Durall Industrial Flooring
7723 Pillsbury Avenue South
Minneapolis, MN 55423
Phone: 1-800-466-8910 or 952-888-1488 (24/7)
www.concrete-floor-coatings.com
harvey@concrete-floor-coatings.com

No-Wait Epoxy Floor Seal for New Concrete

Durall Industrial Floorings announces "No-Wait 2005TM," its new epoxy seal for fresh concrete. Durall has developed special technology that uses the reaction between the fresh cement and the seal coat to produce a finished covering without waiting the traditional 28 days for the concrete to fully cure.

This means that colored and decorative topcoats can go on, without danger of lifting, soon after No-Wait 2005 is applied. Standard epoxy and urethane seals require waiting for new concrete to fully cure before they can come in contact with it. Since the top coats are in contact only with the No-Wait 2005 seal, they are not vulnerable to disruption due to the curing process.

For best results, Durall recommends cleaning the concrete with its high alkaline, high acidic cleaners and a scrub rinse. Because No-Wait 2005 is water based, no drying time is required between cleaning and application. For commercial installers, this results in one trip to the job site rather than two, and no crew time waiting.

Durall Industrial Flooring, Minneapolis, MN, is the only industrial flooring manufacturer that also makes over 500 specialty cleaners. Durall’s 40 years of chemical manufacturing experience has produced a special preparation of cleaners and an application system assuring optimum flooring adhesion and wear results. Durall provides factory-direct support for these new products.

Durall has recognized that customers, whether professionals or amateurs, want to buy solutions - not products. As a result, Durall provides a Web-based, free, cost analysis at www.concrete-floor- oatings.com. Durall field technicians use the floor condition, existing resources, and desired outcome provided by thecustomer to prepare a recommended kit of materials and step-by-step instructions for taking the project from beginning to end. These customized kits are delivered directly to the job site.

To address those unexpected questions and problems, Durall also provides a 24/7 help line during the project.

For more information, contact Harvey Chichester at:
harvey@concrete-floor-coatings.com

Phone: 1-800-466-8910 or 952-888-1488 (24/7)

Durall Concrete Floor Coatings  |  7723 Pillsbury Avenue South  |  Minneapolis MN 55423
Email:
info@concrete-floor-coatings.com   |  www.concrete-floor-coatings.com
Toll free: 800-466-8910  |  Tel: 952-888-1488  |  Fax: 612-435-6600